How To Unlock Apple iPhone:
1. Submit 15-digit IMEI (or 14-digit MEID) to our server (get your IMEI by dialing *#06# on the phone you need to unlock)
2. Wait until we reply your order as "Unlocked"
3. Install most recent version of iTunes on your computer
4. Connect the phone to iTunes with any SIM card inside
6. Wait until iTunes detects the phone
7. Now disconnect the phone and reconnect it after 10-30 seconds.
8. Wait for iTunes to detect the phone again. Now your iPhone is fully unlocked!
NOTE: This is a permanent unlock solution for Apple iPhones as the IMEI is registered as "Unlocked" in Apple database. Your phone will always stay unlocked even after iOS updates!
FAQ
My phone does not have 15-digit IMEI but has 14-digit MEID number. How can I place an order?
Please see the order form below for details on how to submit MEID
Do I need to activate my phone or turn it OFF/ON before ordering the unlock?
We can unlock it regardless of the phone activation status. Feel free to activate it or keep it inactive, whichever works for you. Same applies to powering it ON/OFF.
Once my phone is unlocked, can I use it with any carrier in USA and/or worldwide?
If you phone is NOT blacklisted and has not been reported as lost or stolen it should work with most any carrier in the U.S. and worldwide. Blacklisted phones may not work in USA but that's something you can only verify with the carrier you want to use. Also, while unlcoked phones should work with most any carrier in the world we cannot guarantee any particular carrier compatibility. It's recommended to contact the carrier's customer service with any compatibility quiestions.
Will I have to unlock my Apple iPhone every time I change SIM Card?
No, even if you upgrade the software (flash) or hard reset your Apple iPhone, it remains permanently unlocked, no matter what you do to it.
What is a SIM Card?
A SIM card or Subscriber Identity Module is a portable memory chip used in GSM phones. The SIM Card allows users to change phones by simply removing the SIM Card from one cell phone and inserting it into another. The SIM holds personal identity information, cell phone number, phone book, text messages and other data.
How does the remote unlocking work?
Upon successful order submission, we will process your Apple iPhone's unique IMEI number and email back with confirmation. You'l lthen connect your iPhone to iTunes to complete the unlocking process.
What does IMEI mean?
The International Mobile Equipment Identity or IMEI is a 15-digit serial number unique to every GSM cell phone.
How to get the IMEI#?
Dial *#06# on your phone to retrieve the unique 15-digit IMEI number. It can also be found under Settings -> General -> About.
How safe is it and is it guaranteed to work?
Removing the network restriction on your Apple iPhone with unlocking codes is the safest and fastest way to unlock a cell phone. There is absolutely no risk of damaging your Apple iPhone or void warranty.
How much do you charge and how long does it take to unlock an iPhone?
Prices and processing times are listed on the website under each unlocking service.
How To Unlock Samsung:
Most new Samsung devices manufactured after July 2013 and Samsung devices running Android version 4.4 (KitKat) are subject to REGION LOCKING. If your phone has been used previously with the original carrier, this does not apply to you. However, if your device is brand new, your must activate it with the original carrier. For example if your Samsung phone is from AT&T you must activate it with AT&T SIM card on AT&T network before using the unlock codes we provide. In order for your Samsung device NOT to be region locked, you MUST activate (first use) your S3, S4, S5, NOTE 2 or NOTE 3 with your ORIGINAL carrier at least ONCE to take your region lock OFF. After your region lock is off, you can SIM unlock your device via unlock code provided. Also rooted phones may need to be restored to a factory ROM before using unlock code.
IMPORTANT NOTICE: Make sure to turn OFF Wi-Fi under "Wireless Connections" before proceeding to entering your unlock code. Also make sure the phone is NOT on Airplane Mode. Our Samsung codes are always 100% accurate if you provided correct IMEI. Therefore, a video proof will be required if code error occurs.
What to do if you get the "Network Unlock Unsuccessful" message? This is a known issue so not to worry.
We have put together this troubleshooting guide to help you resolve this issue.
How To Unlock Samsung Galaxy S2, S3, S4, S5, Note, Note 2, Note 3 (III)
Solution #1
Follow these steps carefully and you will be able to get your Galaxy phone unlocked. Your phone must be updated to the latest firmware.
First, verify that your phone isn't rooted. You can download the free app called "Root Checker" from Google Play Store to your Samsung device and verify if it has a root access. If it does, you'll need to restore it to a factory ROM. You can search for instructions on how to do that for your particular device. If your device isn't rooted, then proceed as instructed below.
1. Turn your phone ON with a SIM card inserted.
2. Go to "Settings" then to "Wireless Connections" and turn Wi-Fi OFF:
a. Go to the dial pad and dial *#197328640#
b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK
c. You will see three options
d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
e. Hit the MENU button then when the menu pops up hit BACK to return to the previous screen
f. Click on number [2] Perso Sha256 ON, the screen will change again to a one line message
g. Restart the phone by holding the power button and click RESTART
h. When the phone prompts for the unlock code simply enter the unlock code provided
*If the above steps are not working, go to Solution #2
Solution #2
1. Power ON your phone with different carrier's SIM card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear
2. Type in your unlock code and hit the "Unlock" button. You will get "unsuccessful message" again but don't worry
3. Hit the "Dismiss" button and type *2767*3855# on phone keypad. (CAUTION! This will reformat ALL your data! Save your data BEFORE proceeding!)
4. After phone restarts, type unlock code when prompted and press the "Unlock" button
5. Your phone should now give you the message "Network Lock Successful"
*If the above steps are not working, go to Solution #3
Solution #3
1. Turn OFF the Wi-Fi connection on your phone and then turn device OFF and ON without SIM card.
2. Once it's ON go to phone dial screen and DIAL: *7465625*638*#
it will bring you to the NETWORK LOCK screen.
- in MCC/MNC field enter code for the service provider your phone is originally from (eg 31026 for T-Mobile USA)
check here for list of codes: http://en.wikipedia.org/wiki/Mobile_Network_Code
*If your network has more than one MCC/MNC please try all of them. This is very important.
- in CONTROL KEY field enter the UNLOCK code provided
- press OK
- you should get a message: LOCK SUCCESSFUL
Power phone down, insert SIM card you want your phone to work with and power the phone back ON.
Your phone should be unlocked now.
How to enter code in Samsung Galaxy Avant
You can enter unlock code using three following instructions:
1. Insert a foreig sim card (the sim card which is not supported by Your phone)
2. The phone should ask for an unlock code
3. Enter Unfreeze or Defreeze code ( unsuccesfull message may appear )
4. Enter NCK or Network code
The phone is now unlocked
If your phone does not ask for the unlock code:
1. Turn on the phone with original Sim card or without Sim card
2. Enter #7465625*638*NCK/Network#
The phone is now unlocked.
If your phone does not ask for the unlock code:
1. Turn on the phone with a foreign (Unaccepted) Sim card
2. Then enter the following sequence:
#0199*Unfreeze/Defreeze#
#0111*NCK/Network#
#0121*SCK/Subprovider#
#0133*SPCK/Provider#
The phone is now unlocked
PHONE FREEZE: SIM Unavailable
1. Power on phone with wrong sim inside so phone displays "Phone Freeze, SIM unavailable. Please contact service provider"
2. Enter MCK (defreeze code) and press "OK", "Confirm" or the center button (no digits will be seen on display when entering this code)
3. Now phone will ask you for Network Code, enter NCK (unlock code) and press OK.
4. If nothing happens when you enter NCK (unlock code), you will need to compose code like this: #7465625*638*unlock code#
5. Now your phone should be unlocked.
Note. If phone does not accept NCK (unlock code), and still have no luck with #7465625*638*unlock code# please try step 4 using MCK (defreeze code)
Model: SGH-A127, SGH-E840, SGH-F210, SGH-J600, SGH-T749
1. Turn ON your phone without Sim Card
2. Enter #0111*Unlock code#
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed
Model: A107, A137, A167, A177, A227, A237, A437, A517, A707, A767 Propel, A837 Rugby, A798 Mythic, A867 Eternity, A887 Solstice, C417, E250, E370, E590, F400, G600, i907 Epix, J700, L760, S366, T309, T319, ST349, T409, T429, T439, T459 Gravity, T469, T509, T609, T639, T659, T669, T919 Behold, X497, Z560.
1. Turn ON your phone without Sim Card
2. Enter #7465625*638*Unlock Code#
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed
How to Unlock Samsung T959 Vibrant
1. Insert a NON T-Mobile SIM & turn Device ON
2. The Device will automatically prompt you to enter code into an empty field
3. Tap in the empty field above the "Unlock & Dismiss" options (this will display a key pad on the screen)
4. Using the key pad input the Unlock Code provided by T-Mobile
5. Press the Back button to remove the keyboard from screen
6. Tap the "Unlock" option; handset should display "Network Unlock Successful"
How to Unlock Samsung T959v Galaxy S
1. Insert a NON T-Mobile SIM & turn Device ON
2. The Device will automatically prompt you to enter code into an empty field
3. Tap in the empty field above the "Unlock & Dismiss" options (this will display a key pad on the screen)
4. Using the key pad input the Unlock Code provided by T-Mobile
5. Press the Back button to remove the keyboard from screen
6. Tap the "Unlock" option; handset should display "Network Unlock Successful"
Model: SGH-A877
1. Insert an authorized Sim Card and turn ON your phone
2. Device must be in Portrait mode. Hit the Dial button on the touch screen.
3. Enter #7465625*638*Unlock code#
4. Device should say: “Network Lock Deactivated”
5. Phone may automatically reboot
Model: A737, A777, Blackjack SGH-i607, SGH-i616, SGH-i617, SGH-i637, SGH-A877
1. Insert an authorized Sim Card and turn ON your phone
2. Enter #7465625*638*Unlock code#
3. Device should say: “Network Lock Deactivated”
4. Phone may automatically reboot
NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the Blackjack to change to GSM mode, this can be done as follows:
1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM
5. This should resolve your problem.
Model: SGH-T609
1. Turn ON your phone without Sim Card
2. Enter #011*Unlock code#
3. Device should say: “Network Lock Deactivated”
4. Phone may automatically reboot
Model: i900 / Omnia
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter the PIN code of this refused Sim Card
3. Now should ask for Unlock Code
4. Enter Unlock Code
Model: Zxxx Series, Dxxx Series, Pxxx Series, F490 (ex: Z140, D520, P200, etc...)
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter #7465625*638*Unlock Code#
Model: Z510, Z320i, Z650i
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter **Unlock Code#
Model: ALL other Samsung
1. Insert an unauthorized Sim Card and turn ON your phone
2. Phone will ask for "Password"
3. Enter Unlock Code
Model: ALL other Samsung (if phone show "Insert Correct SIM Card")
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter #0111*Unlock Code#
Model: i450 & i560
1. Turn ON your phone without Sim Card
2. Enter #PW+Unlock Code+1#
The letter P appear after you press star button (*) three times quickly
The letter W appear after you press the star button (*) four times quickly
The letter + appear after you press the star button (*) two times quickly
Model: i780
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter the PIN code to Sim Card
3. At the top of screen an "exclamation mark" icon will appear
4. Click on "exclamation mark" icon
5. Settings Link will appear
6. Click on it
7. Virtual keyboard appears on screen with Enter PIN prompt
8. Enter Unlock Code
Model: SGH-P207
1. Reset to original factory setting by typing *2767*3855#, your phone will reboot
2. Insert an unauthorized Sim Card and turn ON your phone
3. A Wrong Sim message will appear
4. Enter * #9998*3323#
5. Exit white screen appear, tap the right soft key, (occasionally it will not go to the next screen, if so press the down key)
6. Menu appear, scroll down to the malloc Fail option, this will reboot, and normal service screen will appear
7. Enter *0141# and press the green Call key
8. Personalized screen appear, the name of the current Sim Card provider will appear on the screen
9. Turn phone OFF, and then turn back ON
10. Go to menu by tapping left soft key
11. Settings is in bottom right hand corner
12. Select option 7 = Security
13. Select option 6 = Sim Lock
14. Select option 1 = Disable
15. Enter 00000000 (eight zeros), the message will come up Sim lock disabled with a check mark; your phone is now unlocked to use with other carriers.
How To Unlock LG Electronics:
Model : LG Optimus and most other newer LG models
To unlock your LG device simply insert a foreign SIM card into your phone and enter the SIM_UNLOCK(NCK) OR SP_LOCK(SPCK) unlock code.
Once you enter the unlock code your phone will be permanently unlocked and ready to accept any compatible SIM card.
If your phone does not prompt for unlock code, use the following instructions:
Dial 2945#*MODEL NUMBER#
Example:
If your phone is LG MS323, the model number is 323.
You must dial 2945#*323#. You'll see a menu with 5 options:
Select: UNLOCK or UNLOCK 2 and Enter the SIM_UNLOCK(NCK) or SP_LOCK(SPCK) code provided.
NETWORK LOCK UNLOCK
SERVICE PROVIDER LOCK - UNLOCK 2
NETWORKSUBSET LOCK - NONE
CORPORATE LOCK - NONE
SIM/USIM LOCK - NONE
IMPORTANT: If your phone is requesting Service Provider code, use the SP_LOCK code (SPCK).
Model : LG Sentio GS505
1. Power phone ON with original SIM
2. Type 2945#*505# to enter unlock menu
3. Enter the unlocking code
Model : LG GS170
1.- Power phone ON without SIM
2.- type 2945#*71001# to enter unlock menu
3.- enter unlock code
Model: LG C2000, CG225
1. Insert an unauthorized Sim Card and turn ON your phone
2. The phone will display "Phone Restricted"
3. Select "Cancel"
4. The phone will display "Phone Restriction Code"
5. Enter Unlock Code
6. Select OK
7. The handset is now successfully unlocked
Model: LG CE110
1. Insert an unauthorized Sim Card and turn ON your phone
2. The phone display “Invalid Smart Chip”
3. Select "Cancel"
4. The phone displays "Phone Restriction Code"
5. Enter Unlock Code
6. Select OK
7. The phone may reboot and the unlock is completed
Model: LG CF360 Method 1
1. Insert an unauthorized Sim Card and turn ON your phone
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked
Model: LG CT810 Incite
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*810#
3. A Menu will open up
4. Select Sim unlock
5. Enter Unlock Code
6. Press OK
7. The phone will reboot and the unlock is complete
Model: LG CU320
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter 277634#*#
3. Enter Unlock Code
4. Access the Sub-Menu "Sim Test" in the Test Mode
5. Enter 2945#*#
6. Access the Sub-Menu "Sim Unlock" which is activated after the special code
7. Enter Unlock Code in the "Enter Unlock Code"
8. Phone is now unlocked
Model: LG CU400 & CU405
1. Insert an unauthorized Sim Card and turn ON your phone
2. The phone display “Invalid Smart Chip”
3. In Idle screen, enter 159753#*#
4. Phone will display "Enter NCK, Remaining 5"
5. Enter Unlock Code
6. Select OK
7. The phone may reboot and the unlock is completed
Model: LG CU500
1. Insert an unauthorized Sim Card and turn ON your phone
2. The phone display “Invalid Smart Chip”
3. If the phone DOES NOT display invalid smartchip, please power off and on again.
4. In Idle screen, enter 159753#*#
5. Phone will display "Enter NCK, Remaining 5"
6. Enter Unlock Code
7. Select OK
8. The phone may reboot and the unlock is completed
Model: LG CU515, CU757 Trax
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Select 1 and then 1 again
4. Enter Unlock Code
5. Press OK
6. The phone may reboot and the unlock is completed
Model: LG CU720, TU720 & All LG Shine Series
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Enter Unlock Code
4. Press OK
5. The phone may reboot and the unlock is completed
Model: LG CU915 & CU920 Vu
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. Device should say “Network Lock Deactivated”
7. Phone may automatically reboot and is now unlocked
Model: LG GD510 Pop
1. Insert without a Sim Card (Some version need an authorized Sim Card) and turn ON your phone
2. Enter 2945#*510#
3. Select "Network Unlock" option
4. Enter Unlock Code
5. Press OK
Model: LG GR500 Xenon Method 1
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. Device should say “Network Lock Deactivated”
7. Phone may automatically reboot and is now unlocked
Model: LG GR500 Xenon Method 2
1. Insert an unauthorized Sim Card and turn ON your phone
2. Phone will display "Phone restricted"
3. Select "Cancel", phone will display "Phone restriction code"
4. Enter Unlock Code
5. Press OK
6. Device should say “Network Lock Deactivated”
7. Phone may automatically reboot and is now unlocked
Model: LG GC900, GT360, GT810, KC550, KF600, KP230, KP500, KP501, KP270, KS360, KM500, KM900, GR500 Xenon Method 3
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*71001#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG GW520
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*71001#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG KC910, KF910 (aka LG Prada)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*910#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG KE850 Prada
1. Insert an authorized Sim Card and turn ON your phone
2. Enter Sim PIN if required
3. Enter 2945#*8501# and press the call button (middle button, bottom of the screen)
4. SIM unlock mode will appear on screen
5. Enter Unlock Code
6. Select Reboot
7. Turn phone OFF, and then turn back ON again. Phone is now unlocked
Model: LG KE990 & KU990 Viewty Method 1
1. Insert an authorized Sim Card and turn ON your phone
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. Sim unlock mode will open up
5. Enter Unlock Code
6. Press OK
7. The phone will reboot and the unlock is completed
Model: LG KE990 & KU990 Viewty Method 2
1. Power On the phone without a authorized Sim Card
2. Hold "Camera" + "Lock" button
3. You will get keypad and Enter 2945#*990#
4. Enter Unlock Code
5. Your cell phone will be retart
6. Turn off cell phone and insert Sim Card
7. Unlock is completed
Model: LG KF300
1. Insert an unauthorized Sim Card and turn ON your phone
2. Phone alert "Insert Correct Card"
In the screen, right under you see deblokkeren (Dutch), Click on it
3. Click "Network Lock Off"
4. Enter Unlock Code
5. Select OK
Model: LG KF390, KF390q, CF360 Method 2
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Select Unlock USIM
4. Select Network Lock
5. Enter Unlock Code
6. Select OK
Model: LG KF700 (aka LG Virgo)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*700#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG KF750, KF755d
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*750# (or 2945#*755# if 2945#*750# does not work)
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG KM900 Arena
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*71001#
3. Menu appears, select Security>Sim Lock
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG KP100
1. Insert an authorized Sim Card and turn ON the phone
2. Enter 2945#*20001#
3. Enter Unlock Code
4. Phone will reboot and phone is unlocked.
Model: LG KP265
1. Insert an authorized Sim Card and turn ON the phone
2. Enter 2945#*265#
3. Menu will appear
4. Select Settings
5. Select Security
6. Select Sim Lock
7. Select Network
8. Select Deactivate
9. Enter Unlock Code
Model: LG ME550
1. Insert an authorized Sim Card and turn ON the phone
2. Enter 2945#*71101#
3. Menu will appear
4. Select Settings
5. Select Security
6. Select Sim Lock
7. Enter Unlock Code
8. Press OK
Model: LG TE365 Neon
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Select Yes
4. Enter Unlock Code
5. Enter Unlock Code again.
6. Press OK
7. The phone may reboot and the unlock is completed
Model: LG ME970, TU550, TU915 (Method 1)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*9701#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG TU330, TU915 (Unlock Method 2)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG U300
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 815118#*#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG U310
1. Turn ON the phone without Sim Card
2. Enter 815118#*#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG U400
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*88110#
3. Phone will prompt “Unlock Sim”
4. Press OK
5. Phone will prompt “Network Unlock”
6. Press OK
7. Phone will prompt “Input Network Control Key”
8. Enter Unlock Code (If the unlocking code comes with only 7 digits, add 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digits code)
9. Press OK
10. The phone may reboot and the unlock is completed
Model: LG U830
1. Insert 3G Sim Card and turn ON your phone
2. Enter 94471877#*#
3. Select "Unlock USIM"
4. Select "Network Unlock"
5. Enter Unlock Code
6. Phone will show "Network Unlock Success" and The phone will reboot and the unlock is completed
Model: LG U970
1. Insert an authorized Sim Card and turn ON your phone
2. Enter 2945#*970#
3. Sim unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
Model: LG U8150 Method 1
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter 277634#*#
3. Select Menu then "SIM Lock"
4. Enter Unlock Code
Model: LG U8150 Method 2 with Service Provider lock
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter 277634#*#
3. Select Menu then "SIM Lock"
4. Enter Unlock Code
5. The phone will then prompt "Input Network Control Key" (Enter the 8 digit unlock code. Press OK. If the unlock code comes wiht 7 digits, add a 0 in front. If the unlock code comes with 6 digits, add 00 in front
6. It should give you the message Success
7. The phone will then prompt for Unlock Sim. Press OK
8. The phone will then prompt Network Unlock/Lock. If you scrool down, you will see a message Enter SP Lock. Enter Service Provider Code
9. Then press OK
Model: AT&T GS390 Prime GoPhone
Notice: Do not type 2945#*390# as this may cuase an “Unknown Error” message
1. Insert an unauthorized Sim Card
2. Power on the Device
3. Device will display with Invalid SIM Network Lock
4. Press Unlock
5. You see SIM Unlock Process
6. Select Yes
7. Enter CODE and press OK
8. Re-enter the CODE and select “OK”
9. Your phone is unlocked.
Model: ALL other model
1. Insert an authorized Sim Card and turn ON your phone
2. Enter:
LG 510W: Enter 2945#*5101#
LG 1200 & B1200: Enter 1945#*5101#
LG 5200 & 52200: Enter 2945#*5221#
LG 5300: Enter 2945#*5301#
LG 5400: Enter 2945#*5401#
LG 7020: Enter 2945#*70001#
LG 7100: Enter 2945#*7101#
LG 1100: Enter 2945#*1201# or 2945#*70001#
LG 7250T: Enter 2945#*70001#
LG C2200: Enter 2945#*2201#
LG C3310: Enter 2945#*3311#
LG T5100: Enter 2945#*5301#
3. Select Menu
4. Select Settings
5. Select Security
6. Select Network Provider
7. Select Deactivate
8. Enter Unlock Code
Model: Classified by Model
1. Insert an authorized Sim Card and turn ON your phone
2. Enter:
LG C3100: Enter 2945#*3101#
LG C3380: Enter 2945#*7101#
LG F2300: Enter 2945#*7101#
LG KE260: Enter 2945#*2601#
LG KE970: Enter 2945#*9701#
LG KG120: Enter 2945#*1201#
LG KG220: Enter 2945#*1201#
LG KG240: Enter 2945#*3311#
LG KG280: Enter 2945#*7101#
LG KG290: Enter 2945#*7101#
LG KG800: Enter 2945#*7101#
LG KU250: Enter 2945#*250#
LG KU380: Enter 2945#*380#
3. Select Menu
4. Select Settings
5. Select Security
6. Select Sim Lock
7. Enter Unlock Code
8. Press OK
9. The phone may reboot and the unlock is completed
Model: Classified by Model
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter:
LG C3100: Enter 2945#*3101#
LG C3380: Enter 2945#*7101#
LG F2300: Enter 2945#*7101#
LG KC550: Enter 2945#*71001#
LG KE260: Enter 2945#*2601#
LG KF240: Enter 2945#*240# or 2945#*2401#
LG KF600: Enter 2945#*71001#
LG KF750: Enter 2945#*750#
LG KG120: Enter 2945#*1201#
LG KG220: Enter 2945#*1201#
LG KG240: Enter 2945#*3311#
LG KG275: Enter 2945#*20001#
LG KG280: Enter 2945#*7101#
LG KG290: Enter 2945#*7101#
LG KP270: Enter 2945#*270#
LG KS500: Enter 2945#*500#
LG KT520: Enter 2945#*520#
LG KU250: Enter 2945#*250#
LG KU311: Enter 815118#*#
LG KU380: Enter 2945#*380#
LG KU580: Enter 2945#*580#
LG KU800: Enter 82652#*#
LG L600v: Enter 815118#*#
LG U400: Enter 2945#*88110#
LG U8150: Enter 277634#*#
LG U8210: Enter 277634#*#
LG U8500: Enter 277634#*#
3. Enter Unlock Code
4. Press OK
5. The phone may reboot and the unlock is completed
How To Unlock Blackberry:
WARNING: If after you enter “meood” or “mepd” from the unlock instructions below and your “Enter Network MEP” box show less than 4 try left (default is 10 try left). STOP, do not enter the unlock code.If you enter the wrong code and get to 0 try left, your Blackberry will be permanent locked. Therefore, with MEP Name, you are 100% sure that the unlock code is correct.
Model: 6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:
Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Select Options / Settings.
3. Select Sim Card.
4. Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen.
5. Then enter MEP Hold Alt Key and type number 2. NOTE: You must use the "alt" key to enable numbers, example: enter MEP hold "ALT key" and enter 2. Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box. If you do not see “Enter Network MEP” box, you didn't type in MEP2 properly.
Model: 7100, 8100, 8110, 8120 & 8220, 9100:
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).
3. Scroll to Options and press the trackball.
4. Scroll to Advanced Options and press the trackball.
5. Scroll to SIM Card and press the trackball.
6. Type MEOOD (not case sensitive). This step opens up the personalization on the device.
7. Type MEOO, then hold ALT key and type number 2. Note: When typing in MEOO2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
8. Enter Unlock Code.
9. Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).
Model: 8700, 8700c, 8700g, 8700r
Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Setting icon.
5. Scroll to Options.
6. Scroll to and select Advanced Options.
7. Scroll to and select SIM Card.
8. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
9. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and hold “Alt” key and 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
10. Enter the unlock code.
11 . Press the Joydial to confirm (“Code Accepted should display)
12. Press and hold the red End key to turn the handheld off and then back on.
13. Once the device has powered on, follow steps 1 & 2 and restore connections.
Model: 8300, 8310, 8320, 8520, 8800, 8820, 8900, 9000, 9630, 9650, 9700, 9800
Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press the trackball (“Code Accepted should display)
11. Press and hold the red End key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Method 1: Model: 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have an Unauthorized Sim Card inserted. Unauthorized Sim Card is a Sim Card that is NOT belongs to the provider of the phone. Example: If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.
1. Power on the phone.
2. Phone will said "MEP check failed. Do you want to enter MEP unlock code". Select Yes.
3. "Enter Network MEP code (# left)". Enter the unlock code.
4. Press Enter, you should see “Code Accepted”
5. You need to check Network Connection is set on GSM/UMTS. Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.
6. Once GSM/UMTS is selected. You can now ready to make phone call.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the unlock code.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Notice: If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Model: For Telus & Bell Mobility, Some Fido model and all carrier that have Service Provider block (MEP4).
Sometime we send you two sets of Unlock Code, use the code as a set;
Example: MEP2:43237528-AND-MEP4:35848078 OR MEP4:4371476728858074.
Set 1: MEP2:43237528-AND-MEP4:35848078.
Set 2: MEP4:4371476728858074.
DO NOT mix these two sets. Determine which option look similar to your phone and then follows the correct instructions.
1. If your Blackberry has only Network “Active”, then choose Option 1. You ONLY need the MEP2 code we send you.
2. If your Blackberry has both Network and Service Provider “Active”, then choose Option 2. You need both the MEP2 and MEP4 code we send you.
3. If your Blackberry has only Service Provider “Active”, then choose Option 3. You ONLY need the MEP4 code we send you.
Option 1: |
Option 2 |
Option 3 |
ID: 8901260700015407027 |
ID: 8901260700015407027 |
ID: 8901260700015407027 |
Personalization: |
Personalization: |
Personalization: |
SIM: Disabled |
SIM: Disabled |
SIM: Disabled |
Network: Active (MEP2) |
Network: Active (MEP2) |
Network: Active (MEP2) |
Network Subset: Disabled |
Network Subset: Disabled |
Network Subset: Disabled |
Service Provider: Disabled(MEP4) |
Service Provider: Active(MEP4) |
Service Provider: Active(MEP4) |
Corporate: Disabled |
Corporate: Disabled |
Corporate: Disabled |
Option 1: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 2. Note: When typing in MEP and “Alt” and number 2; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 2: Before you start, you MUST have a Sim Card inside the phone (could be Active or Inactive) & turn OFF ALL wireless radios.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen.
8. Type MEP then hold "Alt” key and type number 2. Note: When typing in MEP Alt 2 the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP2 code we send you.
10. Press the trackball (“Code Accepted" should display).
11. Type MEP then hold "Alt" key and type number 4.
12. Enter the MEP4 code we send you.
13. Press the trackball ("Code Accepted" should display again).
14. Press and hold the red End key to turn the handset off and then back on.
15. Once the device has powered on, follow steps 1 & 2 and restore connections.
Option 3: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.
1. Press the Menu key.
2. Scroll to and select Manage Connections. Select Turn All Connections Off.
3. Press the red end key or the Escape key to go back to the Home screen.
4. Scroll to and select the Options icon.
5. Scroll to and select Advanced Options.
6. Scroll to and select SIM Card.
7. Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.
8. Type MEP then hold “Alt” key and type number 4. Note: When typing in MEP and “Alt” and number 4; the letters/number will not appear on the screen, this step open up the “Enter Network MEP” box.
9. Enter the MEP4 code we send you.
10. Press Enter (Press the trackball for 8830), you should see “Code Accepted”
11. Press and hold power key to turn the handset off and then back on.
12. Once the device has powered on, follow steps 1 & 2 and restore connections.
Here are the SPC/MSL CDMA Unlock Codes
MSL/SPC Code: To use this code:
1. From the home screen of the Blackberry, press the green call button to enter the phone.
2. Type in ##MSL/SPC CODE then the green talk button (ie: ##123456 Green talk button).
3. In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number.
4. Press the menu key and choose save.
5. The device will re-boot.
When the device re-boots, Activation Required will be gone and the active carrier name will now appear.
Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:
1. If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.
2. Sometimes the phone requires you to do "MEPPD" and “MEPP2” instead of "MEPD" and "MEP2". If this occurs, redo unlock step above with "MEPPD" and “MEPP2”
3. If the network not working after your phone is fully charged and unlocking process “Code Accepted”. You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network. Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )
Removing "Activation Required" on the screen for Verizon Storm:
1. On the main screen, press ##000000
2. For the Mobile Directory Number, Enter your phone number in here.
Press the Menu to save the options and the phone will automatically restart.
How To Unlock Nokia:
NOTE: If you receive an error message while performing the instructions below, stop. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. Verify the IMEI by pressing *#06# and submit a new request.
Model: All Nokia
1. Insert an authorized Sim Card and turn ON your phone. (authorized Sim Card is the original carrier Sim Card that come with the phone)
2. Press #
3. Press * three times = P
4. Press * four times = W
5. Press * twice = +
6. Enter the unlock code
7. Press * twice = +
8. Press 1, then # and the display should read "SIM Restriction Off"
Model: All Nokia for Fido/Rogers
1. Insert an authorized Sim Card and turn ON your phone. (authorized Sim Card is the original carrier Sim Card that come with the phone)
2. Press #
3. Press * three times = P
4. Press * four times = W
5. Press * twice = +
6. Enter the unlock code
7. Press * twice = +
8. Press 7, then # and the display should read "SIM Restriction Off"
How to Enter Unlock Code on Nokia C3
1. Turn on the phone with a non-accepted SIM card
2. Phone will display SIM is restricted
3. Press OK to be able to enter the unlock code
4. Type: #pw+CODE+1# and press OK (Rogers / Fido use #pw+CODE+7#)
5. Phone is unlocked!
**NOTE: For Nokia C3 ONLY, DO NOT use * , type #PW+ directly on the keypad and Replace CODE with the unlock code we send you
IF YOU ARE RECEIVING "CANNOT UNDO RESTRICTION', " NOT ALLOWED OR PHONE RESTRICTIONS MESSAGE"
This means your phone is hardlocked and you will have to use the following software:
You will require the following:
A USB Cable for your Nokia phone.
The correct USB Cable Drivers. Installing the 'Nokia PC Suite' software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers. You can find it
HERE
A small software application that you can download from
HERE.
The unlock code sent to you by us,
Once you have all of these, follow the directions below:
Switch on your phone without a sim card. You should be prompted to 'Start Phone Without SIM Card' or similar. Click 'Accept' or 'OK'. Your phone is now in offline mode.
Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode', mass storage mode etc... stay in this screen, do not select any of the options.
Start the SendCodeUsb application you downloaded earlier and click on the 'Read Phone Info' button. The application should display several lines of information. If it says "not found" replug your phone into the usb, and then click read phone info
If the application still displays 'Not Found', your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.
Now make sure you check the 'Check For Fbus' checkbox. Also make sure the 'Level(1-7)' selection is set to the appropriate carrier
For ROGERS AND FIDO use +7 or +1
For all Telus devices use +5 or +1
For all UK devices use +1 and +7
For all Tmobile USA devices use +1
Enter Only The Numbers of the correct unlock code into the 'Unlock Code (15 digits)' field (e.g. if your correct unlock code was #pw+123456789012345+1# you would enter only 123456789012345 in this field)
Click on the 'Send Unlock Code' button. The application should confirm that your Nokia phone is now unlocked.
Model: All Model
1. Switch ON your phone with an Unauthorized SIM Card
2. Phone will prompt for Unlock Code
3. Enter the Unlock Code
4. Your phone is now unlocked
Model : All Motorola
1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.
WARNING : If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !
Model : Motorola A1000 and other A models
1 - Click on the icon Phone
2 - Enter the following keys: ** 057 *
3 - Mobile displays "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok
Model : Motorola L6i & L7i (not L6 and L7 without "i")
1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.
Motorola 3G
If your phone is on a 3G network enter **057*
Then enter the unlock code into the window
Motorola CDMA & TDMA
Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Enter the code you receive
Your phone is now unlocked
Motorola Gleam
Insert a not allowed SIM card.
Phone will ask enter unlock code
If the unlock code is incorrectly entered three (3) consecutive times the phone will be blocked and stop ask to enter unlock code. In this situation you can 3 try to enter #073887* or Insert not allowed SIM card wait 10-30 min
or Up firmware and do Wipe data/Reset factory.
Motorola MPX
Switch ON your phone with a not allowed SIM card
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
Your phone is now unlocked
If phone is asking for NETWORK PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password.
If phone is asking for SERVICE PROVIDER PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you
Model: V3xxr from AT&T Boot 06.24
For those who are experiencing problems with this phone you use this procedure
1 - Get the code from our website
2 - Download Motorola Radiocomm v11.7.4
3 - Install Radiocomm and all needed drivers (we recommend 3.5 version)
4 - Open radiocomm and attach the phone wait until phone get connected to radiocomm or until drivers are fully installed if thats the case press "get imei" in radiocomm if imei appears in the screen the we are ready.
5 - Press "gsm3" tab and in the left side of the screen look for "sbsdy_lck" and select "get status" and hit execute if the phone returns 01 means that your phone is locked.
6 - Now select check if valid and enter the 16 digits code from server and hit execute in the upper side of the screen must be appears that subsidy code is done know turn fo your phone and power it on and thats it
How To Unlock HTC & T-Mobile G1, G2:
Model: All HTC Model
1. Insert an unauthorized Sim Card and turn ON your phone
2. Phone will ask "SIM Network Unlock Code"
3. Enter Unlock Code
Model: HTC Snap/Dash 3G
1. Insert an authorized Sim Card and turn ON your phone
2. Go to Setting.
3. Select Security.
4. Select Unlocking SIM.
5. Enter Unlock Code.
Model: Telus & Verizon HTC Touch Pro2 / Ozone / Imagio
1. Start
2. Go to Setting.
3. Select Security.
4. Select SIM Unlock My Phone.
5. Enter Unlock Code.
6. Go to main Menu, select Phone Network Mode.
7. Select GSM/UMTS only.
Model: United Kingdom Orange Desire
1. Insert an unauthorized Sim Card and turn ON your phone
2. Phone will ask "SIM Network Unlock Code"
3. Enter Unlock Code
4. "SIM Service Provider Unlock PIN".
5. Enter Unlock Code again.
How To Unlock Huawei:
Model: All Huawei
1. Turn ON the phone with an Unauthorized Sim Card.
2. Pone will prompt for Unlock Code.
3. Enter Unlock Code.
4. Phone now Unlocked.
How To Reset Simlock Block Huawei:
Modell: All Huawei
Notice: You must enter the 2nd code, 3rd code, and 4th code separately until the phone display “Sim Network Unlock Pin”, and then you enter the 1st code to unlock the phone.
1. Turn ON the phone with an Unauthorized Sim Card.
2. Enter the 2nd set of code.
3. Enter the 3rd set of code.
4. Enter the 4th set of code.
5. Enter the 1st set of code.
6. Phone now Unblocked and Unlocked.
How To Unlock Motorola:
Model: All Motorola; check below for exception
1. Insert an unauthorized Sim Card and turn ON your phone.
2. “Enter Subsidy Code” box appear
3. Enter Unlock Code
WARNING: If one of these messages appears:
-"Contact Service Provider"
- "Tamper Alter"
- "Wait before enter special Code"
- "Contact Service”
It's because you or somebody already enter too many wrong codes, you just have to let the phone ON at these errors message (do not close the phone if V3) and after 40 minutes to 12 hours, the message " Enter Subsidy Code" will appear again.
Model: A1000 and other A series model
1. Click on the Phone icon
2. Enter **057*
3. "Locking Enter Personalization" box appear
4. Enter Unlock Code
5. Press Ok
Model: L6i & L7i (NOT L6 and L7)
1. Press and hold * key and enter 787090
2. “Menu Network” box will appear
3. Select Yes
4. Press OK
5. Will ask for code
6. Enter Unlock Code
Model: All Motorola 3G network model
1. Enter **057*
2. Enter Unlock Code
Motorola CDMA & TDMA
1. Enter 74663# [Menu] [Menu] and you will be asked for a Subsidy Code
2. Enter Unlock Code
Motorola MPX
1. Insert an unauthorized Sim Card and turn ON your phone
2. If the phone is asking for NETWORK PIN
3. Enter the NETWORK PIN
4. If the phone is asking for SERVICE PROVIDER PIN
5. Enter the SERVICE PROVIDER PIN
6. Your phone is now unlocked
Motorola Cliq Q700 Activation bypass.
1. Press Menu and L key together
Network PUK
If the phone is asking for NETWORK PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see an Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. Turn your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minutes to 12 hours until the message "Enter NETWORK PUK" is gone. Now enter the Unlock Code and 00000000 (eight zero's) as a new password
Service Provider PUK
If the phone is asking for SERVICE PROVIDER PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see a Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. If you do not have the original Sim Card or if the original Sim Card is not accepted because you flashed the phone with other firmware, then we cannot help you.
How To Unlock Sony:
Notice: Ericsson, Sony, and Sony Ericsson are three different instructions.
Model: All Sony
1. Insert an unauthorized Sim Card and turn ON your phone
2. Enter *#7465625*12*Unlock Code#
Model: All SonyEricsson
1. Turn ON your phone without Sim Card
2. Press left arrow ONE TIME
3. Press * button TWO TIME
4. Press left arrow ONE TIME
5. The message "Personalize with MNC2" will appear
6. Enter Unlock Code. It may be necessary to PRESS ENTER or OK
NOTICE: If your phone have a "JOGDIAL" (Ex: SonyEricsson K700i) you must press "down arrow" instead of "left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down.
How To Unlock Pantech
Model: C150 (at&t), C530
1. Insert an unauthorized Sim Card and turn ON your phone
2. The display will show “Change SIM” and Left Soft Key will be labeled “Unlock”
3. Press Left Soft Key - A “Password” box will appear
4. Enter Unlock Code
5. Press “OK” - Center Soft Key
6. The device will display “rebooting” and then power cycle
7. The device is now unlocked
Model: All other model (method 1)
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. A Sim Unlock Menu will appear
4. Press OK
5. Enter Unlock Code
6. Re-enter Unlock Code
7. The phone will display Unlock Process Complete
8. Press OK
9. The phone is now unlocked
Model: All other model (method 2)
1. Insert an unauthorized Sim Card and turn ON your phone
2. A Sim Unlock Menu will appear
3. Enter Unlock Code
4. The phone will display Unlock Process Complete
5. The phone is now unlocked
How To Unlock ZTE:
Model: All Model
1. Switch ON your phone with an Unauthorized SIM Card
2. Phone will prompt for Unlock Code
3. Enter the Unlock Code
4. Your phone is now unlocked
Order and pay your iPhone unlocking here. Your unlock will be processed following the delivery time you see on this page. A confirmation will be sent to your email as soon as the job is done.
- Permanently factory unlock your iPhone without jailbreaking, by whitelisting your IMEI in the Apple iTunes database.
- All our unlocks are guaranteed to work, or your money back. No quibbles, no questions, no hassle.
- Factory Unlock all iPhones regardless of bootloader, baseband and firmware version up to the latest iOS and beyond (if you don't know what this means, don't worry - it simply means we can unlock any handset).
- Upgrade and Sync iPhones using iTunes without fear of ever being locked out.
- Quickest factory unlock guaranteed.
- Every single feature works perfectly 100%, and your warranty remains valid.
- Always upgrade to latest firmware, with our unlocks you simply update using iTunes and your device remains unlocked.
1 - Switch ON the phone with a not allowed SIM Card
2 - Phone will ask "SIM Network Unlock Code"
3 - Enter code
If you have trouble to enter code and/or if code is not accepted on Samsung Android Phone like Samsung T959, then please try to make "Factory Reset" following the instructions below :
1 - Shut your Android Galaxy S down (Power off) or remove Battery.
2 - Now press Volume up, Home and Power together.
3 - If the Samsung Symbol is comming up leave the Home Button.
4 - Then there is a boot Menu
5 - Volume Up and Down to Navigate , Home to select the choosen option.
Our instructions are GLOBAL instructions for all unlocking services. Instructions about unfreeze are meant for people who have purchased a FACTORY SAMSUNG GENUINE UNLOCK CODES service, which include UNFREEZE code. If you have purchased a carrier unlock code (from you network provider): this service does not include UNFREEZE code. If you have FREEZED your phone, the unlock network code won't help to unfreeze, only unfreeze code will reset freezed phones.
-
Step 1: Determine the lock level of your Samsung
-
If you have ordered unlock codes from our website, you will have been pleased to see that every possible unlock code has been emailed to you.
The unlock codes emailed to you will look something like this:
Unfreeze: 12345678 NCK: 12345678 SCK: 12345678 SPCK: 12345678
Most networks only lock their Samsung handsets with the NCK lock enabled. Therefore you should only need to use this code when following the input instructions (see step 2). However some networks will have dual locks in place (whereby the NCK and another lock is enabled) or they may have just an alternative lock level such as SCK or SPCK.
It is best practice to be 100% sure which lock level is present on your handset, to do this follow these instructions:
Enter the following code into your handset while it is turned on and connected to its locked network.
By this we mean the connected to the network your handset is locked to (if you are locked to Orange, insert an Orange SIM card into your handset)
Once connected, enter this code: *#7465625#
A menu will be displayed that will resemble the following...
1. [xxx] Network lock
2. [xxx] Subset lock
3. [xxx] SP lock
(xxx = Value ON or OFF)
If only the Network lock is displayed saying ON then you will only need to use the NCK code with the instructions below. If you see the Subset lock value as ON then you will need the SCK code and if you see the SP lock value as ON you will need the SPCK code.
The unfreeze code we send you should only be needed if:
(a) You accidentally freeze your handset by entering too many incorrect codes or not following our unlock instructions accurately.
(b) Your handset displays the 'phone freeze' message whenever an alternative network SIM card is inserted into your phone prior to it being unlocked.
(c) You see the 'return for service' message.
Now you know the correct lock level of your handset and thus the correct code required for input, you may continue...
NB: If your handset does not accept the code to locate your lock level, simply move straight on to step 2 of this guide...
-
Step 2 : Input Instructions
-
Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series
1- Switch ON your phone with a non accepted SIM Card,
2- Compose: #7465625*638*CODE# (or *#7465625*638*CODE#)
Model : Samsung Z105 & Z107
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#
Model: Samsung i616 Jack or Blackjack2 from Fido Canada
1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
4. Device is now unlocked
Model: Samsung A767 (Propel), A437, T459 (Gravity):
1 - Power on without SIM
2 - Type in #7465625*638*Unlock code# (8 digit unlock code*)
3 - Device should say: �Network Lock Deactivated�
4 - Phone may automatically reboot
Model: Samsung SGH-T459 (Gravity):
1. Power on without SIM
2. From the standby screen, use the dial pad to enter the number sequence
3. Type in #7465625*638*Unlock code# (8 digit unlock code*)
4. Device should say: �Network Lock Deactivated�
Model: Samsung i900 / Omnia
1 - Switch ON your phone with a NON Accepted SIM Card,
2 - Enter the pin code of this refused Simcard
3 - Device is now asking for another pin code
4 - Then enter the Unlock Code !
Model: Samsung Zxxx, Dxxx, Pxxx, T139 & F490 (ex : Z140, D520, P200, etc...)
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#
Model: Samsung Z510 et Z320i et Z650i :
1 - Switch ON your phone with a not Accepted SIM Card,
3 - Compose **CODE#
Model : Samsung i450, i560 & i8910
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
Model : Samsung i780
1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen an "exclamation mark" icon will appear
4. Click on "exclamation mark" icon
5. There will appear link "settings" - click on it
6. Virtual keyboard appears on screen with Enter PIN prompt.
7. Enter your 8-digit unlock code.
Model : Samsung i900
1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen a "lock" symbol with the letters NET will appear
4. You will also be presented with the options "OK"; "Dismiss"
5. Press the "OK" option
6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).
7. Enter your 8-digit unlock code.
8. Your phone is now unlocked
Model : Samsung SGH-P207:
1. Reset to original factory setting by typing *2767*3855#, youre phone will reboot
2. Then insert a sim card that is from another network that your phone is not locked to.
3. An Wrong sim message will come up on the screen
4. When message appears type in* #9998*3323#
5. At this time a white screen will appear which says "exit"
6. Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key)
7. From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear.
8. Then type *0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen.
9. Turn phone off, and then turn on
10. Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable
11. Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers.
Model : All others Samsung
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.
OR (if phone show "Insert Correct SIM Card")
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#
OR
1 - Switch ON your phone with an unaccepted SIM Card,
2 - The Phone will then ask for the Code or Password
3 - You can now enter the Unlock Code we sent to you.
-
Step 3: Trouble Shooting
-
If your handset freezes for whatever reason and displays the 'Phone Freeze' or 'Return for Service' message then you will need to use the unfreeze code that was issued with your unlock codes.
Below you will see a list of instructions for entering the unfreeze code into different models of Samsung handsets.
Choose the handset instructions closest to your own model if it is not directly available. (i.e. if you have a Samsung i900, consider using the Samsung F480 unfreeze instructions).
NB: Unfreeze instructions are given as an added bonus to your unlock service. This is not the service you purchased and therefore it is provided free of charge.
Reasons for "Phone Freeze"
1. Inputting the unfreeze code rather than the unlock code into your handset.
2. Following the incorrect input procedure for your handset (these must be followed 100% correctly).
3. Handset automatically displaying "Phone Freeze" when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine.
Unlocking the phone when in "Phone Freeze"
In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad.
Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services.
Option 1 (usually used with keypad Samsungs - U900 etc)
While an unaccepted SIM card is inserted
Enter the unfreeze code
Hit OK (either the left soft key, or in the middle of the touch-field)
Your handset may or may not display an unfreeze message
Now enter your unlock code (see step 1 above to determine this)
The phone should now unlock
or
Option 2 (usually used with touch screen Samsungs - F480 etc)
With Original SIM card in handset
Enter #7465625*638*UNFREEZE CODE
Phone Unfrozen
Input unaccepted SIM card into handset
Enter #7465625*638*UNLOCK CODE#
Your Phone should now unlock
or
Option 3 (possible with any Samsung handset)
While an unaccepted SIM card is inserted
Enter unfreeze code
Hit OK
Enter unlock code
Your phone should now unlock
Please note once again, these instructions for frozen handsets are used at the owners risk.
Unfreeze codes are supplied as a bonus for certain Samsung services and we make no warranty or guarantee of their success.
If in doubt, our customers may wish to have their handset manually unfrozen by a local independent mobile phone specialist before returning to use the unlock code we provided which is 100% accurate for your handset.
Instruction on how to unlock Samsung SGH-A107:
1. Turn ON your phone without Sim Card
2. Enter #7465625*638*Unlock Code#
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed
SideKick Activation Procedure.
1. After your phone is unlocked insert your SIM card.
2. It will then ask for activation.
3. Press and hold top left menu button then press the 'L' button.
4. Your phone is now activated.
Please Note: You may have to repeat this procedure again if your phone is turned off or your SIM card is removed.
We strongly recommend you to be SURE than your phone is NOT BARRED. We provide a CHECKMEND tool to verify that your imei is CLEAN BEFORE processing this unlock process. it may result in not getting a refund depending the solution you choose, please check features supported.
Please make sure when ordering the handset is verified and confirmed being locked to this network only. If you are unsure please do not order, as phone will NOT be unlocked, and it may result in not getting a refund depending the solution you choose, therefore please use iPhone Network Finder to verify on which network your iPhone is locked. Please check features supported.
Model : Panasonic GD67/68 & GD87/88 & x70 & P341i
1 - Switch ON your phone without SIM Card,
2 - Compose : 746 and press 2 times the button "OK",
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.
Mode : Panasonic G60
1 - Switch ON your Phone with a not allowed Accepted SIM Card
2 - Enter your PIN Code and Confirm
3 - Press a second time on OK button
4 - The phone now ask for Unlock Code !
Model : Panasonic GD50 & GD55
1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.
Model : Panasonic X60 & X400
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.
or
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - Compose : 746 and press 2 times the button "OK",
4 - A new menu will appear, select "NCK",
5 - You can now enter the Unlock Code we send to you.
Model : Panasonic X100
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : #*7465625*638*CODE#
Model : All BlackBerry
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked
Model : Blackberry 9530 Storm
1. Insert any SIM card and turn ON your Blackberry.
2. Turn OFF all the wireless connections.
3. Go Back One Step by Pressing the Back Key.
4. Go to Options
5. Select SIM card.
6. Press the Menu Key and select "Show Keyboard".
7. Tilt the phone in Horizontal Position so that the Keyboard is displayed in the Landscape Mode.
8. Type MEPD [you will not be able to see the typed info].
9. Then enter MEP2
10. Now your Blackberry will ask you to enter network MEP code
11. Enter the Unlock Code provided by us to you and Press the Enter Key on the Screen.
12. It will now say "Code Accepted'.
13. Congratulations! Your phone is now unlocked. Now your phone can be used with any GSM Network with SIM Card.
14. Go back to the Home Screen. Press the Menu Button and click on Manage Connections.
15. Turn all the Connections ON.The phone will now reboot and ''Activation Required'' will no longer be displayed.
Model : BlackBerry Bold 9000 & Torch
1) Make sure your SIM card is NOT inserted into the device.
2) Turn on the phone and click the �Manage Connections� icon. Choose the option �Turn off all connections.� The cellular radio will be turned off.
3) Go back to the Home screen and click the �Options� icon and select �Advanced Options.�
4) Scroll down and select �SIM Card� from the list.
5) Press the following keys in order: (M) (E) (P) (E)
6) A prompt will appear asking for the unlock code. Input the 16-digit code exactly.
9) Reboot your device.
10) Re-enable the cellular radio
Model : Curve, 8300, 8310, 8320, 8800, 8820
Must be done without a sim card inserted & wireless radios must be turned off.
1. Go to settings.
2. Go to options.
3. Go to advanced options.
4. Go to sim card.
4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).
5. It will say "Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm.
6. Your phone is now unlocked.
Model : BlackBery Storm (9500)
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keybord
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code
Model : BlackBerry 8700
Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.
Model : BlackBerry 8800
***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****
1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from our website and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked
Model : BlackBerry 8100 Pearl
1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.
-
Model : BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is �Invalid SIM card�. (Different message? See FAQ below)
6. Select �Turn Wireless Off�
7. Select �Settings� Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type
9. When prompted with �Enter Network MEP code (255 left)� on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
Please Note:
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.
To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is �Invalid SIM card�. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display �Insert SIM� �Bad Card�, �Card Error� or �Card Rejected�, confirm the SIM card is inserted correctly €“ Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.
Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.
Model : Trium Mars
1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M341i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M342i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : All Mitsubishi
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : All Ericsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
Model: All Nokia
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
(if locked from Fido/Roger Canada, please compose#PW+CODE+7#)
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
3 - The phone show "SIM Restriction Off" and was unlocked !
Model: Nokia C3
Turn on the phone with a non-accepted SIM card inserted. It should state that the SIM is restricted.
Press OK to be able to enter the unlock code. Then, using the full QWERTY keypad as normal, type: #pw+CODE+1# and press OK
Note: replace CODE with the unlock code we send you
Model : Sagem My-S7
1 - Switch ON your phone without SIM Card,
2 - Compose : *#*#CODE# and press "Call" button.
Model : All Sagem
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Phone will show "SIM VERROU"
3 - You can now enter the Unlock Code we send to you.
WARNING : if your mobile show "CODE POSTE" it's because you have a Security Code, can be 0000 or 1234 but we can't calculate this code with your IMEI because it's not code from Phone but code from the User of the Phone !
Model : All Kenwood
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Enter the Unlock Code we send to you.
Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM
This should resolve your problem.
Model : HTC SNAP
- Go to "Setting"
- Go to "Security"
- Select "Unlocking SIM" (at the bottom option)
- Enter Code you receive !
Model : All (including G1)
1 - Switch ON mobile with a not Allowed SIM Card,
2 - If phone ask, enter the PIN code of your SIM Card
3 - Now phone will ask you to enter the unlocking code !
Model : SPV C500
1 - Switch ON mobile with a not Allowed SIM Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !
How To Unlock CDMA/GSM HTC Phones:
1. Insert not allowed SIM card.
2. Phone will tell you to insert an allowed SIM card and that the phone will switch back to CDMA mode.
3. Click OK.
4. Click green button to get to the main screen of the phone.
5. Click on settings.
6. Click on all settings.
7. In the personal tab click on security.
8. The phone will ask you to enter the unlock code. Enter it. Done.
HTC DROID Incredible 2 - ADR6350VW SIM Unlock Instructions
If customer has a Verizon Wireless SIM card in the Device:
Generate or buy SIM Unlock code
Go to: Settings -> Security -> Disable SIM card lock + Enter
Enter the SIM Unlock code when prompted.
If customer has non-Verizon Wireless SIM card in the Device:
- Generate or buy SIM Unlock code
- Have the customer power cycle the device
- Enter the SIM Unlock code when prompted (This will occur when device is powering up)
device
Model : Treo 180 & 270
1 - Switch ON your phone without SIM Card,
2 - Compose : *#*#CODE#
Model : Treo 600
1 - Switch ON your phone with Allowed SIM Card,
2 - Go to Menu and select "Phone Tool" or "Phone Application"
3 - Type on Virtual Keyboard *#*#CODE#
4 - Select with PEN "Numer" and phone will show that's unlocked now !
or
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we send to you.
Model : Palm Pre and Palm Pre Plus
1. Turn off cell phone - put in a not allowed SIM card.
2. Turn on cell phone - phone asks for network unlock pin (referring to the unlock code).
3. Enter pin number once (at this point there is no error)
4. Phone states SOS only calls - when you try to make a regular call it will ask for the network unlock pin again. At this point no matter how many times you put in the pin. It will state incorrect pin message.
5. Reboot phone with the same not allowed SIM card.
6. After reboot, it's unlocked and never asked for the network unlock pin again.
Model : Method Generic
1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
Model : 531 & 535
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.
Model : All other Alcatel
1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you
Model : Nec N342i
1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.
Model : All others NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #7320*CODE#.
Model : old NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #3210*CODE# and press Call Button.
Model : All Philips
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone ask for "Enter NCK",
3 - You can now enter the Unlock Code we send to you.
Model : LG Optimus 3D P920
1. Power on your LG phone with the original SIM card in
2. Enter 2945#*920#
3. A menu will pop up, select SIM Unlock or network lock
4. Enter your NCK unlock code and hit OK
5. Your LG phone may automatically reboot
Model : LG Cookie Style T310
1 - Power ON the phone with a not accepted simcard,
2 - Type 2945#*310# to enter unlock menu,
3 - Enter unlock code.
Model: LG GT400 Viewty Smile
1. Switch ON the phone without SIM Card,
2. Press the "CellPhone" icon at the bottom of the screen to show the keypad,
3. Compose 2945#*400#
4. A new menu will appear, select "SIM Unlock"
5. Enter the Unlock Code and press OK
6. The phone will restart and is now unlocked !
Model: LG Optimus 2X
1. Insert the sim card which works out your phone
2. Enter 2945#*990#
3. window appears for the code
4. Enter the code nck received
5. the phone is unlocked
Model: LG Optimus 7 and LG-E900
1 - Insert SIM Card from a not accepted SIM Card
2 - Type the PIN Code of your SIM Card and submit it
3 - The message "... Please call your network provider to get the unlock code" will appear
But on the bottom of the screen, the keyboard is still here with "#" and "*" and invite you to "Type PIN"
Just submit the code you receive and that's it !
Model: LG P500 Optimus
1. Power ON your phone with not allowed sim card (one that didn�t come with the phone)
2. Type 2945#*500#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked
Model : LG GW300 Viewty & Gossip
1. Power on your LG Viewty GW300 with the original SIM card in.
2. Enter 2945#*71001#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!
Model: LG GT350 Town
1. Power on the LG GT350 Town with the original SIM card in.
2. Enter 2945#*350#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. The LG GT350 Town will restart..
6. Put in any sim card you want, you will need to make a call for the new sim card to initialise with the phone.
7. Thats it, mobile unlocked.
Model: LG GM360 Viewty Snap
1. Power on your LG Viewty GM360 with the original SIM card in.
2. Enter 2945#*360#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
Model: LG GS290 Cookie Fresh
1. Power phone ON with original SIM
2. Type 2945#*290# to enter unlock menu
3. Enter the unlocking code
Model: LG GT400
1. Turn phone on without simcard
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*400#
4. A menu will pop up, select network unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete
Model: LG GW620
1. power phone ON with original SIM
2. type 2945#*620# to enter unlock menu
3. Enter the unlocking code
Model: LG GM205
1. switch on your phone with original working simcard
2. enter code 2495#71001# .. nothing will show in the screen.
3. now go to menu > setting > security > simlock > network lock > deactivate: enter your unlock code in it
Model: LG GW820 eXpo
1. Power on your LG GW820 eXpo with the original SIM card in.
2. Enter 2945#*700#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG GW820 eXpo may automatically reboot.
Model : LG GM205
1. Power phone ON with original SIM
2. Type 2945#*71001# to enter unlock menu
3. Enter the unlocking code
Model: LG GB250, GB220
1. Power on your phone without SIM card
2. Enter 2945#*71001#
3. From the menu that pops up select "SIM unlock"
4. Enter unlock code you received from our website and press OK
5. The phone will then reboot and the unlock is complete
Model : LG GW520
1. power phone ON with original SIM
2. type 2945#*71001# to enter unlock menu
3. Enter the unlocking code
Model : LG Viewty / GW300
1. Power on your LG Viewty GW300 with the original SIM card in.
2. Enter 2945#*700#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK. (Entering multiple incorrect unlock codes may permanently lock your phone!)
5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!
Model: LG BL20
1. insert original sim card and turn phone on.
2. Enter 2945#*20#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
Model: LG BL40
1. insert original sim card and turn phone on.
2. Enter 2945#*40#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
Model : LG C1100
- First you must put in an allowed simcard, then :
- type 2945#*1201#.
- Goto Menu/Settings/Security Settings/Sim Locks
- Select 'Locktype'/Deactivate and Enter the code.
Model : LG GT505
- power phone ON without SIM
- type 2945#*505# to enter unlock menu
- enter unlock code
Model : LG GB250
- power phone ON without SIM
- type 2945#*71001# to enter unlock menu
- enter unlock code
Model : LG GW520
- power phone ON without SIM
- type 2945#*71001# to enter unlock menu
- enter unlock code !
Model : LG KB770
1. Power on phone with original SIM card
2. Type 2945*#770#
3. In the menu that appears select Sim unlock
4. Enter supplied unlock code
5. Your phone is unlocked
Model : LG KP170
1 - Switch ON your phone with a T Mobile Sim inserted
2 - Press telephone icon at bottom of screen to bring up the phone keypad
3 - Then compose : 2945#*170#
4 - A menu will pop up, select Unlock Usim
5 - Then Select Network Lock
6 - Enter your unlock code and press ok (you only have 10 attempts)
7 - The phone will then reboot and the unlock is complete.
Model: LG CU-515
1.Put a SP-locked sim in the phone, phone say invalid smart chip
2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
Phone will be unlocked!
Model : LG TE365
1. Power on phone with original SIM card
2. Type *#0001#code#
3. Your phone is unlocked
Model : LG CT810 (Incite)
1. Power on phone with original SIM card
2. Type 2945#*810#
3. In the menu that appears select Sim unlock
4. Enter supplied unlock code
5. Your phone is unlocked
Model : LG CB630 (Invision)
1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL
5) It should you ask you for the code
Model : LG U830
1. Have your unlock code handy.
2. InserI a 3 SIM card in the phone and switch power on.
3. Enter the following key sequence 94471877#*#
4. Select the option �unlock USIM�.
5. Select the option �network unlock�
6. Enter your unlock code.
7. Handset should now display �network unlock success�.
8. Handset will now restart.
Model : LG KF300
1. Put wrong simcard
2. Phone alert 'insert correct card'
3. Right under in screen you see deblokkeren (dutch)
4. Click on it en click 'Network lock off'
5. Insert code!
Model : LG KP100
1. Insert original sim card and turn phone on.
2. Enter 2945#*20001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG KF755d
1. Insert original sim card and turn phone on
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*755# (or 2945#*750# if 1st option doesn't work)
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete
Model : LG Incite CT-810
- Insert a SIM from the original network
- 2945#*810# will show the unlock menu
- Enter unlock code
Model : LG KP265
1 - Use Original SIM to switch ON the Phone.
2 - Compose 2945#*265#
3 - Then go to MENU > SETTINGS > SECURITY
4 - Then go to SIM LOCKS > NETWORK > DESACTIVATE
5 - ENTER NCK (your Unlock Code)
Model : LG ME550
1 - Use Original SIM to switch ON the Phone.
2 - Compose 2945#*71101#
3 - Menu will appear, go to settings > security > sim lock
4 - Enter NCK ( Unlock Code ) and press OK.
Model : LG TU915
- Switch ON your phone with an allowed SIM Card
- Then compose: 2945#*9701#
- It should you ask you for the code
OR
Enter *#865625# then enter your 16 digits code
Model : LG KF390, KF390q and CF360
1) Insert a SIM Card from the network the mobile is locked to and turn it on
2) Insert the following sequence *#865625#;
3) Select 'Unlock USIM'
4) Select 'Network Lock'
5) Insert the unlock code
6) Select ok. Done!
Model : LG G910 :
1. Insert an invalid simcard and turn phone on.
2. Insert PIN
3. Phone says \"Invalid sim card\"
4. Select \"Emergency calls\"
5. Enter 2945#*71001#
6. Sim unlock mode pop up
7. Select netlock
8. Enter your 16-digit unlock code and press ok
9. The phone will then reboot and the unlock is complete.
Model : LG Prada, KE850 :
1. Switch the telephone on with Original SIM card inside.
2. Enter SIM pin if required.
3. Enter 2945#*8501# and press the call button (middle button bottom of the screen).
4. SIM unlock mode will appear on screen.
5. Enter unlock code
6. Select Reboot.
7. Switch phone off, and then turn back on again. Phone is now unlocked
Model : LG CT810
1. insert original sim card and turn phone on.
2. Enter 2945#*810#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG VU CU915 & CU920 (Vu)
1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Enter *#865625# then the 16 digit unlock code
3. Device should say: Network Lock Deactivated
4. Phone may automatically reboot and is now unlocked !
Model : LG U310
1. Turn ON the phone without SIM Card
2. Enter 815118#*#
3. Sim unlock mode pop up
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG iQ
1 - Switch ON mobile with a not Allowed SIM Card,
2 - If phone ask, enter the PIN code of your SIM Card
3 - Now phone will ask you to enter the unlocking code !
Model : LG KC550, KS360, KP230, KP500, KP501, KP270, KM900, KM500, GT810, GC900, GT360
1. Insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG KF700 (aka LG Virgo)
1. insert original sim card and turn phone on.
2. Enter 2945#*700#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG KC910, KF910 (aka LG Prada)
1. insert original sim card and turn phone on.
2. Enter 2945#*910#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG KF750
1. insert original sim card and turn phone on.
2. Enter 2945#*750#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG KF600
1. Insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Model : LG U970
1. Insert original sim card and turn phone on.
2. Enter 2945#*970#
3. A menu will pop up, select Unlock Usim.
4. Select Network Lock.
5. Enter the unlock code and ok.
Model : LG U300
1 - Switch ON the phone with Accepted SIM Card (from Original Network Provider)
2 - Enter Code : 815118#*#
3 - then phone will ask to enter NCK
Model : LG C2000
1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked
Model : LG KU990 Viewty & KE990
1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.
or
1. Without sim phone power "ON"
2. Hold "camera" + "lock" button
3. You will get key pad write 2945#*990#.
4. Press active code.
5. Your cellphone will be restart
6. Turn off cellphone and insert your sim (internation sim)
7. Enjoy your unlocked phone !
Model : LG TU720 - LG CU720 (Shine)
1) Power ON your phone with not allowed sim card (one that didn't come with the phone)
2) Type *#865625#
3) the phone will ask you to input the unlock code twice, just input the unlock code
4) Device is now unlocked
Model : LG CE110
1) Put a non AT&T or Cingular SIM in the phone;
2) The phone display: Invalid Smart Chip
3) Power on handset
4) Select "Cancel" - phone displays "phone restriction code"
5) Enter the unlock code (8 digit code*)
6) Select "OK�" - the handset is successfully unlocked
Model : LG GR500 (Xenon)
1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked
or
1. insert original sim card and turn phone on.
2. Enter 2945#*9701#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
or
After turning on your mobile phone, press: *#865625#
Press Yes to continue.
Enter the 16 digit Subsidy Unlock Code
Enter the 16 digit Subsidy Unlock Code, again.
Device should say: �Network Lock Deactivated�
Phone may automatically reboot
Model : LG CU320
1) Power on the handset
2) In Idle screen, input the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test" in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock" which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.
8) It will be unlocked.
Model : LG CU400 & CU405
1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will be unlocked.
Model : LG CU500
1) Insert non-Cingular SIM card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully unlocked.
Model : LG CU515, CU575 (Trax)
1) Put a non-Cingular sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select 1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.
Model : LG U8150
1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.
Model : LG U400
1. Insert the network SIM in the handset which has given u the LG U400.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.
Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
10. Then press OK
Model : All other model
1 - Switch ON your phone with an Allowed SIM Card,
2 - Then compose :
2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)
3 - Go to "Menu" and then to "Settings",
4 - Then select "Security",
5 - To finish select "Network Provider" and select "Desactivate"
6 - Enter the Unlock Code we send to you.
Model : To Classify
For the next models u must to insert the original SIM:
LG KF245c press 2945#*7101#
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#
After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.
For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
LG U400 press 2945#*88110#
LG KC550 press 2945#*71001#
LG KU580 press 2945#*580#
LG KT520 press 2945#*520#
LG KF750 press 2945#*750#
LG KF600 press 2945#*71001#
LG KG275 press 2945#*20001#
LG KU380 press 2945#*380#
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KS500 press 2945#*500#
LG KP270 press 2945#*270#
LG KF240 press 2945#*240# or 2945#*2401#
LG KG290 press 2945#*7101#
LG KU250 press 2945#*250#
Enter NCK and press OK.
Model : VK530
1 - Switch the handset ON without SIM Card - screen will display Insert Card.
2 - Compose : *#83*737# (press and hold # for 1 sec) - this will give access to the personalisation menu
3 - Select Disable Personalisation
4 - Type Unlock Code we send to you and press the ok button
5 - Handset should now be unlocked
ZTE S302 & EMPORIA V35 etc...
Switch on your phone with non valid sim card
Enter unlock code received as follow: ###3854#UNLOCKCODE#
Model : All SonyEricsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of "left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down !
Model : Sony Ericsson Satio and Sony Ericsson Vivaz
1 - Switch ON your phone without a SIM Card
2 - Compose #PW+CODE+1#
(where CODE is the unlock code you are sent by email)
Press the star (*) button repeatedly to make the P, W or + appear
Model : Sony Ericsson X10
1. Put in a sim card from a non accepted network
2. Turn on the phone
3. It will then request for an unlock code
4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen
5. Input the unlock code
6. Press "UNLOCK" button which is below the unlock code box on screen
Model : VK530
1 - Switch the handset ON without SIM Card - screen will display Insert Card.
2 - Compose : *#83*737# (press and hold # for 1 sec) - this will give access to the personalisation menu
3 - Select Disable Personalisation
4 - Type Unlock Code we send to you and press the ok button
5 - Handset should now be unlocked
1) open Hyperterminal : C:\Program Files\Windows NT (should be there)
2) you must set com port on modem (Huawei Mobile Connect - 3G Modem)
3) type following command : AT^CARDLOCK="<you unlock code>"
4) Validate by pressing Enter.
Model: Mini WIFI Modem
1 Insert Non-Optus SIM card into modem
2 Power device on €“ wait until the device has completed it�s initialization
3 Make sure there is a connection between the WiFi Modem and the client (eg computer)
4 Start an Internet browser and enterhttp://192.168.1.1 in the address bar. (The default password is admin).
5 Enter the password, and then click Login
6 Select Settings
7 Select Dialup and then Unlock SIM
8 Enter unlock code and then click Apply
9 Unit resets itself if successful.
Model : All Sendo
1 - Switch ON your phone with a not allowed SIM Card,
2 - Message "Enter NCK" will appear,
3 - You can now enter the Unlock Code we send to you.
Model : All Wonu
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we send to you.
Model : Trium Mars
1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M341i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M342i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : All Mitsubishi
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : All Bosch
Switch on your phone with a not allowed SIM Card
When the message "Enter Network Key" appear enter the Code we send to you.
Model : All Benq
1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code we send to you.
Model : All Siemens
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Compose : *#0000*CODE#
or
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Compose : *#0001*CODE#
Model : All Vitel
1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code we send to you.
Model: TSM7
1 - Switch ON your phone without SIM Card,
2 - Enter the Code ##**9987,
3 - The phone now ask for Unlock Code.
Model: GTX75
1 - Put original sim carrier
2 - Type *#865625#
3 - Phone will now ask for Unlock Code
Model : All Sharp
01 - From front screen type *01763*6371#
02 - The handset will reset back to the main screen
03 - Press M button.
04 - Scroll to Settings and press SELECT.
05 - Scroll to Security and press SELECT.
06 - Scroll to MEP locks and press SELECT.
07 - Enter your Handset Code (the default code is 0000) and press OK.
08 - Scroll to Network and press SELECT.
09 - Scroll to Deactivate and press SELECT.
10 - Enter Unlock Code we send to you and press OK.
11 - Handset should then display DONE and be unlocked.
Model : All Sony
1 - Switch ON your phone without SIM Card,
2 - Compose : *#7465625*12*CODE#.
All models:
1.POWER ON PHONE WITH ACCEPETED SIM CARD
2.Press the following keys: *#865625#
3.A SIM Unlock Menu will appear, press OK
4.Enter Unlock Code (8 digit code)*
5.Re-enter Unlock Code (8 digit code)*
6.YOUR PHONE will display Unlock Process Complete. Press OK.
7.The PHONE is now unlocked
You provide us with the SERIAL NUMBER, EGATE NUMBER, AXALTO CARD NUMBER, OMNIKEY SERIAL NUMBER, or what ever the number is called by the software. This information is then used to provide you access to the original server of the manufacturer of the product. This means you will have full access to the activation you have just ordered. This is the MOST secure solution to be sure that you have ordered a 100% GENIUNE software or activation. Once you have request the response from our services, simply connect to your personal account and start using your new services.
Model : Treo 180 & 270
1 - Switch ON your phone without SIM Card,
2 - Compose : *#*#CODE#
Model : Treo 600
1 - Switch ON your phone with Allowed SIM Card,
2 - Go to Menu and select "Phone Tool" or "Phone Application"
3 - Type on Virtual Keyboard *#*#CODE#
4 - Select with PEN "Numer" and phone will show that's unlocked now !
or
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we send to you.
Model : Treo 680 / Centro:
1. Power on with non-cingular sim
It will then say "Your phone cannot be used with this SIM card"
2. Click ok
3. Click dialpad tab, bottom of the screen far left
4. Using stylus type *#*#code#
5. Press the green button
6. It will then say The SIM Lock has been removed from the phone"
Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
Model : All Toshiba
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Enter the Unlock Code we send to you.
OR
1. Insert Non Vodafone SIM into the handset and power on.
2. The display will show Enter Network Unlock Code.
3. Enter **00012* then 47369761 followed by #, then press the centre menu key.
4. The display will now show Done.
5. Switch the phone off and on. The phone will now be unlocked
TS803 :
1. Insert Non Vodafone SIM into the handset and power on.
2. The display will show SIM Error. This SIM card cannot be used
3. Press the centre menu key for 3-4 seconds. The display will show Enter Code
4. Enter unlock code
5. The handset will then reboot itself. Once completed, the handset will be unlocked
Model: Portege G710
1 - Power on phone with sim accepted
2 - Put pin code
3 - When phone is ready, go to: START - ACCESORIES - UNLOCK SIM
4 - Enter UNLOCK CODE, and ACCEPT
Model : All Sanyo
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we send to you.
- Device must be in Portrait mode.
- Type: *#865625#
- SIM Unlock Process Menu will appear.
- Press OK to continue.
- Enter Unlock Code will appear.
- Enter the 16 digit subsidy unlock code
- Press Done.
- Your device is unlocked.
Model: GTX75
1. Turn phone with an accepted Sim Card and open slide
2. Type *#865625#
3. Tap Bottom Left of the Screen to continue
4. Enter Unlock Code then OK